Author Mowgli emperor Yu, from the original Tiger-bashing.
In iPhone 6s and iPhone 6s plus is listed Zhiji, Lei Feng network (search “Lei Feng network” public, concern) in micro-Bo Shang found has one in Shenzhen China strong North stole Division art of good Sao years, except revealed has how refurbished Apple Phone zhiwai, also taught you how identify refurbished machine avoid fall and so on, feel is to full copy end of China strong north of rhythm Ah…… Of course, the authors at the end from their many years of experience of a number of prevention techniques, teach you how to identify the refurbished machines, see below for details:
On Apple phone of debate has been are has, to I of experience for many speech are not right, to some cheese caused misleading, also some unknown story of guess and rumors, in 6s and 6ps is listed Zhiji, I to wrote some on China strong North Apple phone market of things, also is also to himself big half of China strong North learning experience do a summary, wrote articles Qian first see Xia I to a friends refurbished phone of process:
Change of old machines
As this phone is the phone now screen knock injury (although normal touch), four corners there are three angle significantly drops traces of bump, normally it is impossible to directly sell, to do renovation to sales (to my friend).
Refurbished appearance need to prepare a post screen, and a copy of the shell. Shell-bottom position after this time are blank, no cell phones on all kinds of information.
IPhone is not difficult to remove, generally only need 3 screwdriver, and a pair of tweezers. Remove the screen first.
And then removing the vibrator and pull out the telescopic stick remove the battery.
The next step is to remove the rear camera, then GPS and WiFi signal booster module, then the Board can take down. Motherboard design is extremely precise and is the most expensive part.
Board take down zhihou is speakers (is responsible for outside burst into sound), tail plug (is responsible for headphones hole output, audio entered and charging function), then removed stick in Board Shang of vibration + volume row line (vibration switch and volume added reduction), and boot row line (bright breath screen and switch machine), whole process normal to do probably 20 minutes, to a family Fu!
After the hosts take out accessories, in the reverse order of the above after all fit into the new shell, is first loaded on the volume cable, power cable and the plug. Note the tail plug section at the bottom of the machine, if it is refurbished for sale because the headphone jack and charging hole is usually dirty, may be replaced with tail-like plug, this one is being refurbished to a friend with this part need not change. IPhone factory assembly line production is governed by strict quality control, but renovation not so crooked rows sewn up it is normal (who threw bricks … … ）
Fitted with speakers, boards and GPS signal enhancement module, cable jacks on the buckle, equipped with cameras and shield and screws according to the reverse order.
Buckle battery socket, fitted with vibrators, host part of the renovation process was completed. Machine dismantling machine complex, I’m not skilled, spent about 40 minutes.
New screen modification
Next part of the screen, to give two screens to a photo.
After screen down so, is responsible for calling the handset speaker sound output, cable is responsible for connecting the handset and motherboard, there is a sensor on the cable, is responsible for the induction of light. Home+ fingerprint to unlock the keys, is responsible for the return to the main page and the fingerprint sensor. Large metal shield is used as shielding the electrostatic and isolate the motherboard battery heating, but also to the reinforcement of part of the screen. Black cable is a fingerprint cable, connected home key and the system board.
This “new” screen is positive, also did not install the front facing camera +home + sensor key time appearance.
Because screen disassembly and Assembly simpler than the motherboard, not more, installed back after this appearance, spent about 25 minutes before and after.
Mounted after good look on the side of the screen, look at those metal part is easy screen button border above the host.
The “new” fit, you’re done
The “new” screen and “new” photo of the machine. R2D2 iPhone case
Buckle screen line after trying to open the machine, can assemble them into the system to confirm problem-free button on the bottom of the screen after inserting the screw. (If you can’t get into the system a chance to analyze the reason and then split again)
Everything OK, look “fresh”.
OK if you memory will remember the machine back cover there is no code, but this is hua qiang bei, Ah, just 3 dollars + 5 minutes the machine version information and serial number on the back cover, a large quantity discount (spray … …
After the code on a refurbished machine fresh from the oven, from the white level is basically cannot see where there are problems, buy brand new original Apple 6 people will feel a little wrong but what’s wrong and do not know, only doing this for some time can resort to some minor details to tell whether refurbished machines. After distribution box with plastic film on a “new” machine was OK.
Of course if you refurbished machines and the original machine together, it was easy to tell, but one or two lines outside the city there aren’t many opportunities like this, or refurbished machines will not sell so much.
How to identify the refurbished machines?
Next key toggle vibration under there is no dust, vibration sensitive strength strong under normal conditions (vibrations with long strength weakened). Volume plus or minus feel good, no dust in the slot, press the sound of flip-down, if feel soft or press the collapse problem.
Home key press-flop sound, feel good feedback, press see gaps there is no dust. Check the plug and headphone jack there is no dirty (earphone hole, where you can prepare a cotton swab into two circles and then take a look at). After the check Plug and shell are linked closely together, some shell-like tail socket do not standard tail Plug and the space between the edge and the back shell is clear. Look closely at the lower screw holes have signs of wear. Loudspeaker to emit sound hole on a specific point of view can see the Sheen, it’s Apple doing chamfers process, if you look at it must be imitated without corner not glossy shell, chamfer is not obvious but do have the chamfer is the imitation of better quality.
Before Apple 5S and 5 generations of shell-like chamfers do badly or simply only hole without chamfer, are easily recognizable, Apple 6 and 6P shell because prices are high enough so some manufacturers of profit after spending more money to do high quality imitation shell, chamfer also did relatively well, lack of experience can be difficult to identify. Factories have shed some quality of the iPhone does not cross the border of the original shell, if the refurbishment of the original shell renovation of these defects is not obvious, that basically unrecognizable.
Touch the card slot SIM card slot here and the fuselage between the flat, if slots significantly dented and that is relative to the fuselage shell-like (see more at 5 and 5S). Open slots look the motherboard there is no dirty look at the card slot if there is dirty. Switch button sensitive, feel good, press the flip sound, or soft touch buttons collapse loosened problems will arise.
Check to see if the center point of the front-facing camera on the alignment Panel open hole official assembled an absolute standard, refurbished machines do not install camera is easy to hold crooked. See if receiver dust-proof net covered with dust. Check screen bracket for overflow, look at the screen and back-shell joint gap is not uniform, bracket there are burrs and cracks do not even have a problem. Light up the screen and see the dark side of the screen, if black is not uniform and that is pressure screen technology isn’t good enough, not the original screen pass.
Look closely at the camera there is no dust. Carefully touch the LOGO part ever raised, the original machine the Apple logo is absolutely flat, shell-like logo, there was a little rough and made my hands. Star Wars R2D2
Said above is the identification of refurbished machines, in fact, distinguish between two mobile phones is similar, because someone will take color well new machines when new machines sold, edges have some dust, do not absolutely new appearance. It is my personal experience of refurbished machines, read it again just to spend a few minutes but to rely on their own accumulated but spent several months, countless mines and stepped in the middle … …
Tips
Micro sweep sweep, author tips bar ~
5646 votes
iPhone 6
September 10, 2014, at 1 o’clock in the morning Beijing time, the company held at the Flint Center for the arts at the California Institute of kubidinuodeansa the fall of 2014 launch, officially released its next generation iPhone 6.
This is the largest mobile phone release in Apple’s history. September 12 opening book on September 19. First listed of countries and regions including the United States, and Canada, and France, and Germany and the United Kingdom, China, Hong Kong, Japan, and Singapore and Australia, China missed the iPhone 6/6 Plus a starter.
View details of the voting >>
YSL iPhone 6 Case 